Die 4 Haupt GANSe und Aminosäuren
Inhaltsverzeichnis
The 4 main GANSes and Amino Acids
The first step before we start making GANSes, is the Nano-coating. Our basic GANSes are CO2, ZnO, CuO and CH3. The Amino Acids of each GANS are very important too.
Required materials
- Plastic container
- (Distilled) water
- Unrefined, natural sea or rock salt (or pharmaceutical NaCl for Health applications)
- Nano-coated Copper (Zinc) wires for connecting the metals
- Nano-coated Copper plates or coils (for ZnO GANS a Nano-coated Zinc plate is used)
- Various uncoated metal plates (Zinc for CO2 and ZnO, Copper for CuO and Iron galvaniced with Zinc for CH3)
| GANS | Color | Coated Material | Uncoated Material | Salt content |
|---|---|---|---|---|
| CO2 (ZnO + CO2) | cream white | Nano-coated Copper | Zinc | 3-10% |
| ZnO | white | Nano-coated zinc | Zinc | 3-10% |
| CH3 (FeO + CH3) | reddish brown | Nano-coated Copper | Zinc-coated Iron | 3-10% |
| CuO (CuO + Cu) | turquoise | Nano-coated Copper | Copper | 3-10% |
(As well proven, average salt content for the production of GANS, 5% has been found. (That does not mean, that for specific applications a other Salt content would be better. You have to try it out. Read more about Salt.)
IMPORTANT: When you produce your different GANSes, keep a distance (at least 3m, best 5m) between the different GANS-container. The closer the container, the more you get a mixture of different GANSes. Keep in mind, that through the selection of your different metals, you create a "magnet", which attracts the fields from the environment.
CO2 GANS / Basic Box setup
See also: CO2 GANS
The (plastic) box is the basic for creating every GANS production of the 4 main GANSes (Picture below). It basicaly filled up with 5% Salt-water. This Salt content has proven to be very well for all basic applications.The plates should hang around 80% in the water and 2 cm above the bottom of the box. The mounted holder wires on the picture, should be placed at least 0.5 cm over the water. (Especially the non Nano-coated Copper wire should not touch the water, because it can have the unwanted effect on the production, that CuO GANS is made too). The two connection wires, get connected with an green led. The longer pole (+) gets connected with the Nano-coated Copper plate and the shorter pole (-) gets connected in this case of a CO2 production, with the not Nano-coated Zinc plate connection wire.
When we speak about CO2 GANS, there is everytime a amount of ZnO in it too. The use of a green led, to connect the connecting cables allows a high yield of CO2 in the ratio 90:10 to ZnO and the GANS looks creamy white.The ZnO cannot be eliminated completely from the GANS mixture when creating CO2 GANS, but this is of no consequence. (There is also the opportunity to make it without led, but the the ratio of CO2/ZnO GANS is then 20:80. Read more: CO2 GANS)
- GANS basic box setup (CO2).png
(CO2) GANS basic box setup
- CO2 GANS bottle.jpg
CO2 GANS bottle
- CO2 Amino Acids.jpg
CO2 Amino Acids
[In the other GANS productions (ZnO, CuO, CH3) other combinations of plates are used and for the case, you don't have Copper wires or Zinc wires, or Nano-coated wires, it should not stop you, using that, what you have. It's just fine tuning for a very propper GANS. By CO2 GANS, a led is important for preferably high yield of CO2, but if you don't have it, you can also twist the two connection wires just counter clockwise together, as at the other GANS productions too. For CO2 do not use additional electricity.]
ZnO GANS
See also: ZnO GANS
For producing Zinc GANS we use a Nano-coated Zinc plate and a normal Zinc plate and connect it with wires and a led between. Some use current for this production. On the surface of the water Amino Acids are created, which get collected seperatly. Only for this GANS, we use instead of a (Nano-coated) Copper wire a (Nano-coated) Zinc wire. The connection wire (Nano-coated Zinc) from the Nano-coated Zinc plate is connected with the + pole of the led and the - pole of the led, is connected with the Zinc wire to the Zinc plate.- ZnO GANS production Amino Acid.jpg
ZnO GANS production Amino Acid
- ZnO GANS bottles.jpg
ZnO GANS production Amino Acid
CuO GANS
See also: CuO GANS
For CuO use a Nano-coated Copper plate and a not Nano-coated Copper plate and you can use Copper wires or Nano-coated Copper wires to connect it with an led between. If you use current for producing the GANS, its too much and you have to use an air pump too.- CuO GANS production.jpg
CuO GANS production
- CuO GANS production bottom.jpg
CuO GANS production bottom
- CuO GANS bottle.jpg
CuO GANS bottle
CH3 GANS
See also: CH3 GANS
On the left side you have the Nano-coated Copper plate and on the right side the with Zinc galvanized Iron plate. It's connected with Nano-coated Copper wire and an Copper wire, also with a led. Current can be used.
At first the Zinc, from the with Zinc galvaniced Iron pate will interact with the Nano-coated Copper and like in the CO2 production, CO2 GANS and the Amino Acid of it will be produced. After a few days, depending on the whole setup and environment, the redish/brown CH3 GANS production will be start and visible. You can let the creamish white CO2 GANS sediments inside and allow them to be mixed up with the redish/brown CH3 GANS sediments.
- CH3 GANS production.jpg
CH3 GANS production
- CH3 GANS Bottle.jpg
CH3 GANS Bottle
